You are here:

Correct use of gas springs

Views: 163 Author: Site Editor Publish Time: Origin: Site

In order to ensure the safety and long-term use of gas springs, correct installation and use are crucial. The following are some basic principles for the correct use of gas springs:

1. Correct installation
 - Orientation installation: Normally, the gas spring should be installed with the piston rod facing downwards (that is, the rod end is downward). This ensures that the lubricating oil can effectively lubricate the sealing ring and prevent premature wear.
 - Avoid transverse stresses: Make sure the gas spring is only subjected to axial forces and avoid transverse stresses (lateral forces) as this may cause deformation or damage to the gas spring.
 - Installation position: The gas spring should be installed in the designed position to maintain balance and stability and avoid any irregular force

2. Load control
 - No overloading: Ensure that the load-bearing capacity of the gas spring meets the actual application requirements. Overloading will significantly shorten the service life of the gas spring and even cause the gas spring to fail.
 - Gradual loading: avoid sudden application of excessive pressure and try to maintain smooth load changes.

3. Operating temperature
 - Appropriate temperature range: Gas springs can work properly within a specific temperature range. Typically, the operating temperature range of gas springs is between -30°C and 80°C. The performance of gas springs may be affected in high or low temperature environments.
 - Avoid extreme temperatures: Extreme high or low temperatures may cause the performance of the gas spring's internal seals or oil to degrade, thereby affecting the life and working performance of the gas spring.

4. Regular inspection and maintenance
 - Regular inspection: Regularly check the working condition of the gas spring, especially the seals and connections, to ensure there is no leakage or looseness.
 - Avoid dirt and corrosion: The piston rod of the gas spring should be kept clean and free from dirt and corrosion. This can be achieved through regular cleaning or the use of protective measures in harsh environments.

5. Avoid violent operations
 - Slow operation: Avoid violent opening and closing when using, especially when approaching the end of the stroke. Slow down the speed to prevent excessive impact.
 - Do not forcefully compress or stretch the gas spring: Do not forcefully compress or stretch the gas spring to avoid damaging the internal structure.

6. Avoid making or disassembling
 - Do not disassemble it by yourself: the gas spring is filled with high-pressure gas, and disassembly without authorization may cause danger.
 - Professional installation: If it is necessary to replace or install a new gas spring, it is recommended that it be done by a professional.

By following the above usage principles, the service life of the gas spring can be extended while ensuring its safety and reliability.

×

Contact Us

captcha
×

Inquire

*Name
*Email
Company Name
Tel
*Message
*Verify Code
captcha